- Replacement taillight mount for Numen lights
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
This replacement part secures a Specialized Stix light but will break free to protect light if snagged or pulled too hard. - This replacement part works with the following Stix mounts: Stix Helmet Mount, Stix Saddle Mount, and Stix Reflector Mount
With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.
Taillight Seat Stay Mount
- Replacement aero mount for Numen light
- Replacement handlebar mount for Numen lights
Designed to accommodate the more aerodynamic profile of aero bars and seatposts, the Stix Aero Strap mount gives you the ability to attach a Specialized Stix for day or night riding. - Stix light mount with longer, flexible silicone strap to fit Shiv and Venge seatposts, plus Aerofly handlebars.
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
Mount your Stix to either your handlebars or seatpost with this versatile Stix light mount with a flexible silicon strap. - Works with handlebars and seatposts from 22.2mm up to 35mm in diameter. - Second loop will fit most seatstay diameters. - Mount only, light sold separately
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Giant's Numen Mini Taillight is small, powerful and surprisingly bright. It's so lightweight, you can just leave it on your bike where drivers will notice its 2 bright LEDs. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
Giant's Numen Mini Headlight is small, powerful, and surprisingly bright. It's so light, you can just leave it on your bars and you'll barely notice it, while drivers will notice its 2 bright LEDs as they illuminate your way. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Simple operation with three super-bright LEDs make the RedBat your go-to taillight for being seen. Solid and flashing visibility options for day and night riding. - 3 LEDs under a red lens (1 lumen) - 4 functions: steady, flashing, chasing, random - 19–40mm diameter bracket - Also works clipped to a bag/waistband - 2 AAA batteries included - Runtimes/Modes: 70 hours in Solid mode, and 160-250 hours in Flashing mode
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Page 1 of 9 Next page