Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cycling Shoes
$249.99
Cycling shoe designed for being warm, comfortable, protective, and with great performance even in the coldest and most humid conditions. Despite its lightness, thanks to Primaloft® Gold and the rainproof membrane, Polar MTB keeps the foot warm and dry even with the most adverse weather conditions. The BOA® L6 dial ensures the right fit and the XECARB®10 sole loaded with carbon fiber gives to the shoes a high rigidity index with great grip. For additional insulating capacity, Primaloft® Gold has been inserted below the EFC insole.
- Upper: Microfiber and Primaloft® Gold
- Sole: XECARB 10
- Weight: 369 gr. (EU 41)
- Performance Fit System: BOA® L6 dial
$160.00
Foot Out, Flat Out—the redesigned 2FO Flat 2.0 was made to get you from the top of the run to the bottom as comfortably and efficiently as possible. Its outsole features our SlipNot 2.0 rubber compound, which was developed as a system to create the best pedal connection possible.
Contrary to popular belief, pedal connection isn’t just about rubber—the rubber hardness, stickiness, lug pattern, midsole thickness, and density all contribute to this connection. Our sole construction, informed by a pressure mapping study, led us to use softer foam in the forefoot with firm-over-soft foam in the rear, giving incredible pin penetration, while also reducing the “standing on a marshmallow” feeling that causes foot cramps on long downhills. Along with the new sole, we've also implemented a toe bumper and a captured foam layer, providing protection from rocks and roots when the trail gets gnarly.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- SlipNot 2.0 rubber compound is our softest, grippiest rubber, and it's optimized for the ultimate in pedal connection
- Engineered lug pattern was specifically designed to integrate with pedal pins.
- Dual-density midsole adapts to the pedal, protects the foot, and results in superb pedal control.
- Captured foam in the upper protects the foot from impacts.
- Air mesh on the tongue and uppers provides protection, while quickly shedding water weight.
- Smooth, thermobonded upper for lightweight durability and a snag-free profile.
- Cushioned EVA foam midsole is sealed with a protective skin for support and tear resistance.
- Lacelock elastic keeps laces out of the chainrings.
- Relaxed Fit for a balance of pedal feel and off-the-bike comfort.
- Approximate weight: 347g (1/2 pair, Size 42)
$160.00
The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions.
Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0.
- Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee.
- Dial & lace assembly is replaceable in seconds with Snap cartridge system.
- Hard-molded toe kick for protection and durability.
- Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit.
- Two-bolt SPD-style cleat pattern fits all major MTB pedals.
- Standard Fit last for all-day comfort.
- Replaceable toe studs.
- Multiple widths available.
- Approximate weight: 365g (1/2 pair, Size 42)
$110.00
With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike.
To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking.
Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 331g (1/2 pair, Size 42)
$180.00
The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt.
Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science.
Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling.
Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0
- Welded upper reduces seams for superior step-in comfort.
- BOA® Li2 dials for on-the-fly micro-adjustment.
- SlipNot™ rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 307g (1/2 pair, Size 42)
$170.00
Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking.
To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride.
An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0
- Welded upper reduces seams for superior step-in comfort.
- BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 357g (1/2 pair, Size 42)
$169.99 - $230.00
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path.
Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer.
We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud.
Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)
$110.00
If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
- Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals.
- Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability
- Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort.
- SlipNot rubber sole for confident traction.
- Cushioned EVA foam midsole for comfort with molded heel cup for stability.
- Relaxed Fit for a balance of pedal feel and off-bike comfort.
- Two-bolt cleat pattern fits all major mountain pedals.
$425.00
Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bikes shoes that truly have no compromises.
We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred."
In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit.
The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts-just explosive speed and superior comfort.
- Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0
- Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort.
- Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Titanium alloy cleat nut.
- SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 300g (1/2 pair, Size 42)
$325.00
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?"
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks.
- Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Titanium alloy cleat nut.
- SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Two-bolt cleat pattern fits all major MTB pedals.
$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care.
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- 280g for a size 156
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
*** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$110.00
Remarkable performance and value make the Specialized Sport MTB shoes a remarkable pair of mountain bike shoes. This durable, lightweight shoe features Body Geometry fit, comfortable offset Velcro closures, and a sole with improved traction for hiking.
- Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection-molded nylon composite outsole with rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0.
- Three-strap offset Velcro closure for comfortable fit.
- Durable synthetic leather and vented mesh upper.
- Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
- Standard Fit for all-day comfort.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 360g (1/2 pair, size 42)
$120.00
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light.
- Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Synthetic upper with for supple feel over the foot.
- Reflective heel elements increase your visibility to motorists in low-light conditions.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 290g (1/2 pair, Size 42)
$110.00 - $120.00
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light.
- Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Synthetic upper for supple feel over the foot.
- Reflective heel elements increase your visibility to motorists in low-light conditions.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 290g (1/2 pair, Size 42)
$160.00
The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction.
- Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Mesh and TPU upper for a supple fit.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 235g (1/2 pair, Size 42)
$225.00 - $230.00
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
$100.00 - $110.00
Whether you find yourself in the gym sweatin' in spin class or out on the open road, our Women's Remix Road shoes are here to provide ample performance and comfort. They're loaded to the gills with comfortable, performance-enhancing Body Geometry features, and they also have highly breathable upper and easy-to-use laces. Consider them a simple, no-nonsense footwear solution to your active lifestyle.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- Welded mesh & TPU upper provides high levels of breathability and supple comfort. It also equates to less stitching and seams against the foot, so you won't experience irritation or chafing.
- Laces were used over buckles for a nearly infinite level of fit customization.
- Two-bolt system fits SPD and all mountain pedals, making them perfect for spin class and road riding.
- Rubber outsole is walkable and helps prevent slipping.
- Standard Fit for on-bike support and all-day comfort.
- Approx. weight: 275g (1/2 pair, Size 39)
$105.00
- ForceDrive Nylon midsole + Rubber outsole
- Clipless with the TrackBone™ Tread
- Enhanced, stretch resistance synthetic leather upper
- 3 large Velcro straps
- EgroComfort footbed with TransTexturaPlus anti-odor Tech
$165.00
Lightweight Mountain Biking Shoes
Ride, eat, sleep, repeat. Hike into the backcountry and feel the freedom of singletrack trails and abandoned dirt roads. Made for adventure riding over rugged terrain, these adidas Five Ten mountain bike shoes have the lightweight, cushioned feel of a trail runner and the pedal-gripping power to ride to any summit.
- Regular fit
- Lace closure
- Textile upper with neoprene cuffs
- Drain ports for water exit
- Stealth Phantom rubber outsole
- Imported
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$49.99
$150.00
67% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly.
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks.
- Cushioned EVA foam midsole for comfort.
- Extended length cleat slot (4mm) for rearward cleat set up option.
- Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- SlipNot FG rubber sole for confident traction.
- Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort.
- Synthetic leather upper with added protection keeps you comfortable and is built to last.
- Two-bolt cleat pattern fits all major mountain pedals.
- XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$49.99
$149.99
67% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly.
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks.
- Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence.
- XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
- Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort.
- SlipNot FG rubber sole for confident traction.
- Extended length cleat slot (4mm) for rearward cleat set up option.
- Synthetic leather upper with added protection keeps you comfortable and is built to last.
- Cushioned EVA foam midsole for comfort.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- Two-bolt cleat pattern fits all major mountain pedals.
- Approximate weight: 395.9 grams
$49.99
$150.00 - $160.00
Up to 69% Off
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly.
- Approximate weight: 395.9 grams
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks.
- Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability.
- Leather and textile upper with added protection keeps you comfortable and is built to last.
- Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
- XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$49.99
$100.00
50% Off
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike.
- UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel.
- STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel.
- COMFORT: canvas upper offers ruggedness and breathability.
- PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning.
- STEALTHY SUPPORT: Internal heel counter adds support without bulk.
- BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$49.99
$100.00
50% Off
The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike.
- UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel.
- STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel.
- COMFORT: canvas upper offers ruggedness and breathability.
- PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning.
- STEALTHY SUPPORT: Internal heel counter adds support without bulk.
- BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
$49.99
$119.99 - $120.00
58% Off
There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style.
Paint Your Trail
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection.
- Canvas and textile upper with added protection keeps you comfortable and is built to last.
- Cushioned EVA foam midsole for comfort and impact absorption.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- Approximate weight: 360g (1/2 pair, Size 42)
$49.99
$120.00 - $130.00
Up to 62% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail.
- Approximate weight: 367g (1/2 pair, Size 42).
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- Cushioned EVA foam midsole for comfort.
- Extended length cleat slot (4mm) for rearward cleat set up option.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- SlipNot FG rubber sole for confident traction.
- Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort.
- Synthetic leather upper conforms to the foot and is built to last.
- Two-bolt cleat pattern fits all major mountain pedals.
$49.99
$119.99 - $120.00
58% Off
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy.
- Approximate weight: 360g (1/2 pair, Size 42).
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- Cushioned EVA foam midsole for comfort and impact absorption.
- Leather and textile upper with added protection keeps you comfortable and is built to last.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
Page 1 of 5
Next page