Write a Review

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

(107 matches)
Surly MWOD Chainrings
$93.00
Trust Surly to come up with a reasonable solution to a bizarre problem. The Surly MWOD chainring set moves a bike's chainline away from the spinning tire allowing for the use of super wide tires on extra wide rims. The genius part is that it doesn't increase the Q factor (a.k.a. width of the bottom bracket) and keeps the low gears necessary for pedaling bikes with monster tires. The chainring set bolts directly to Mr. Whirly cranks and is available in two sizes.
Surly MWOD Inner Chainrings (Stainless)
$28.00 - $30.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
Specialized Praxis Chainrings
$150.00
Not all chainrings are created equal, and if you need proof of this, look no further than these chainrings that Praxis made exclusively for Specialized. - Custom design Praxis rings For Specialized only - Cold-forged, Heat-treated, and hard anodize 7075 T6 Aluminum - Compatible with Campagnolo, Shimano, and SRAM 10-/11-speed cranksets
PowerTap C1 Chainrings
$199.99
- Only dual-sided power meter at this price point. - Conveniently mounts to the crank on your bicycle. - Motion-based electronics eliminates additional sensors. - Compatible with a wide range of alloy and carbon cranks. - This kit does not include a sensor.
Dimension Multi Speed Chainrings
$18.99 - $49.99
Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
Dimension Singlespeed Chainrings
$16.99 - $46.99
Dimension Chainrings. - No ramps, pins, or shift aids
Shimano Dura-Ace R9100 Inner Chainrings
$35.00 - $55.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano Dura-Ace R9100 Outer Chainrings
$226.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
e*thirteen by The Hive Direct Mount Shiftring Sets
$149.95
- Direct Mount Shiftring sets for TRS series cranks - Integrated ring set mounts directly to crank arm - 7075-T6 aluminum construction with 4mm width optimized for all chainguide systems to prevent chain jamming - Requires spider lockring removal tool
e*thirteen by The Hive Guidering M (Narrow/Wide) Chainring
$43.95
- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming -1mm swappable chainline
e*thirteen by The Hive Turbocharger Guard
$54.95
- Patent pending, low weight, high strength, impact absorbing design - Captured aluminum inserts eliminate over-tightening of chainring bolts - Embossed chrome badging - BCD: 4 x 104 - Not compatible with pre-09 E-13 chainguides. 87g (36t)
Wolf Tooth Components 102 Chainring
$77.00
- XTR M960 chainring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 47g (32t)
Wolf Tooth Components 120 Chainring
$75.00
- SRAM XX chainring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Chainring is threaded and requires stock SRAM chainring bolts - Chainline is 51mm for the 36T and 53 mm for the 38T - Made in the USA from 7075-T6 aluminum alloy - 54g (36t)
Wolf Tooth Components 30 Tooth Ring Chainring Bolts
$14.95
- Aluminum bolts for 30 tooth x 104BCD chainring with M8 x 0.75 threaded bolt holes - 10mm long, compatible with a bash ring (bolt length is laser engraved on the head) - 5mm hex, torque to 6-7 N-m maximum with light grease on the threads - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 7g/4-bolt set
Wolf Tooth Components 5-Spoke Gxp Direct Mount Ring
$78.00
- 5-spoke ring replaces the existing chainring and spider on 3-bolt GXP cranks - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Fits SRAM S2200, S2210, X9, X0, X01, XX1, X1 and Truvativ AKA GXP cranks - Dished ring provides 50mm chainline on GXP or BB30/PF30 long spindle (with 15.4mm drive side spacer) - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 65g (30t)
Wolf Tooth Components 64/104 Chainring
$60.75 - $75.00
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components 94 Chainring
$60.75
- 94mm BCD chainring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Four of the five holes are threaded with bosses to engage the crank arms.
Wolf Tooth Components Cinch Direct Mount Ring
$69.95 - $83.00
- CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Cyclocross Chainring
$40.00 - $84.00
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Shimano M9000/M9020 Chainring
$65.00 - $70.00
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Wolf Tooth Components Shimano M985 Chainring
$79.00
- Fits 88mm BCD used on Shimano XTR M985 race crankset (not M980 Trail) - Features Drop-Stop tooth design to prevent unwanted chain drop - 52mm chainline - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 44g (30t)
Wolf Tooth Components Sram BB30 Direct Mount Ring
$78.00 - $83.00
- Replaces the existing chainring and spider on 3-bolt BB30 cranks - Features Drop-Stop tooth design to prevent unwanted chain drop - Fits SRAM S2200, S2210, X9, X0, X01, and XX1 cranks - Flat ring provides 50mm chainline on SRAM BB30 / PF30 short spindle (has 9.1mm drive side spacer) - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wheels Manufacturing Inc. Individual Chainring Spacer
$0.05 - $17.84
- For chain and derailleur alignment - 20 per bag
WeThePeople 4 Star Sprocket
$31.99
A sturdy 4-spoke design and a solid 6mm thick 6061-T6 alloy construction make the 4 Star Sprocket a real killer. - Material: Full CNC 6061-T6 alloy - Thickness: 6.35mm - Special Features: Bolt drive version only, made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles - Weight: 25t: 77g (2.71oz : 0.16lbs)
WeThePeople Pathfinder Sprocket Felix Prangenberg Signature
$44.99
The Pathfinder sprocket is 8mm thick and uses a unique 9-sided design that allowed WTP to integrate the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity even for the most savage rider out there. - Full CNC 6061-T6 alloy - 9 rotation points for longer life - Sunken adapters for perfect chain line - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles
WeThePeople Patrol Sprocket
$36.99 - $43.99
The Patrol sprocket is based on the classic racing sprockets of the past. This one uses a high-quality full CNC construction and offset teeth for a perfect chain line. This thing was designed so you could crank it fast, so bolt one onto your bike and see just how fast you go. - Full CNC 6061-T6 alloy - Thickness: 6.35mm - Bolt drive version only - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles
TruVativ Sram Chainring Bolt Set
$14.00
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
Surly MWOD Bash Guard
$45.00
This aluminum bash guard is compatible with Surly's MWOD cranksets. Keep rocks and roots away from your chainring teeth and ride on.
Surly MWOD Outer Chainring
$65.00
Surly's MWOD chainrings convert your Mr. Whirly crankset into an offset mountain double crank. In simple terms, they allow your fat bike to run an extra wide rear tire and rim combo (for example, 4.7-inch tires on 100mm rims or 82mm rims on your Pugsley) while avoiding chain-on-tire rub. This outer chainring bolts directly to the inner ring with four chainring bolts.
Surly Stainless-Steel Chainring (104mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Stainless-Steel Chainring (110mm BCD)
$30.00 - $60.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.
Surly Stainless-Steel Chainring (130mm BCD)
$48.00 - $62.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Surly Stainless-Steel Chainring (94mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Specialized Mini Chain Guide
$32.49
This minimal ISCG 05 chain guide is designed to promote pedaling efficiency and low drivetrain drag while keeping the chain securely on the chainring through rough terrain.
Specialized S-Works Team Chainring Set
$225.00
Specialized's extra-stiff S-Works Team Chainring Set was originally designed for ProTour riders, with a CNC-machined profile and pick-up ramps for impressive shifting and power transfer. The rings are made of 7075 T6 aluminum, while the shift pins are riveted stainless steel and the chainring bolts are lightweight aluminum. They're compatible with 10- and 11-speed Shimano and 10-speed SRAM.
Specialized SRAM Mountain 11-Speed Chainring
$150.00
Specialized's SRAM chainrings are light and stiff, a perfect fit with your S-Works MTN cranks. • 104 BCD SRAM XX1 style ring • Incudes chainring bolts and spacers for S-Works MTN cranks • Compatible with XX1/XO1 SRAM drivetrains • SRAM X-Sync technology provides durability and chain management
Shimano CX70 Chainring
$39.00 - $57.00
Shimano's CX70 Chainrings tackle the hurly burly of your next 'cross race with confidence-inspiring shifting and category-defining speed. Light, durable, nickel-plated aluminum is precision engineered to keep your chain running smooth and fast. 36- and 46-tooth chainrings provide a great cyclocross-friendly gear range.
Shimano Deore XT M770 10-Speed Inner Chainring
$20.00
Shimano XT M770 10-Speed Inner Chainring - Chainring BCD: 64 - Color: Black - Defined Color: Black - Drivetrain Speeds: 10 - Material: Aluminum - Ring Position/Type: Inner - Tooth Count: 24
Shimano Deore XT M770 10-Speed Middle Chainring
$45.00
Shimano XT M770 10-Speed Chainring - XT FC-M770 and FC-M780 10-Speed cranks use the same middle chainring - Chainring BCD: 104 - Color: Black/Silver - Drivetrain Speeds: 10 - Material: Steel/Carbon - Ring Position/Type: Middle - Tooth Count: 32
Shimano Deore XT M8000 11-Speed Inner Chainring
$28.00 - $29.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano Deore XT M8000 11-Speed Middle Chainring
$31.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Middle - Tooth Count: 30
Shimano Deore XT M8000 11-Speed Outer Chainring
$62.00 - $105.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner - Tooth Count: 34
Shimano Dura-Ace 9000 Inner Chainring
$31.00 - $55.00
Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano Dura-Ace 9000 Outer Chainring
$225.00 - $326.00
Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
Shimano Ultegra 6700 10-Speed Chainring
$18.00
Shimano Ultegra 6700/6750 10-Speed Chainrings - Material: Aluminum - Ring Position/Type: Inner - Chainring BCD: 130
Shimano Ultegra 6800 Inner Chainring
$19.00 - $157.00
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
Shimano Ultegra Chainring
$140.00 - $160.00
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises the super-stiff, hollow outer ring, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command.
Shimano XTR M9000 Inner Chainring
$26.00 - $27.00
Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano XTR M9000 Outer Chainring
$213.00 - $225.00
Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
Shimano XTR M9020 Middle Chainring
$113.00
Shimano XTR M9020 11-Speed Chainrings - For use with 22t (CK9011) and 40t (CK9018) chainrings - Chainring BCD: 96 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Ti/Carbon - Ring Position/Type: Middle
Shimano XTR M9020 Outer Chainring
$212.00
Shimano XTR M9020 11-Speed Chainrings - For use with 30t (CK9017) and 22t (CK9011) chainrings - Chainring BCD: 96 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
SRAM CX1 X-Sync Chain Ring
$82.00 - $99.00
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.
SRAM Force X-Glide 11-Speed Chainring -110 BCD
$134.00 - $140.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM Force 22 compact crank (50/34), this is the ring for you.
SRAM Force X-Glide 11-Speed Chainring -130 BCD
$140.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting.
SRAM RED Chainring
$140.00
Replacement chainrings in 110mm and 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses.
SRAM Red Outer Chainring
$95.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.
SRAM Red Outer Chainring (Compact)
$94.00 - $95.00
SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.
SRAM Red TT Chainring
$100.00
SRAM's TT Chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.
SRAM RED TT Chainring (Hidden Bolt Compatible)
$101.00
SRAM's TT Chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting with a SRAM Yaw front derailleur. This chainring is only compatible with SRAM RED Exogram cranks. RED Exogram crank have a hidden 5th bolt behind the crank arm. It is not compatible with Force, Rival or non-Exogram RED cranks.
SRAM RED X-Glide 10-Speed Chainring (110 BCD)
$36.00 - $125.00
Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram compact crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm
Page 1 of 2 Next page