These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side
- Weight: 168g Ti - Body: Carbon Injection-Molded - Spindle: Titanium - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed) *Titanium spindles have a 180lbs rider weight limit.
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
• Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodized finish • The axle is made of high strength Cr-Mo, heat treated and plated • The platform is slightly concave in shape to give maximum support • Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life • Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)
$179.90 - $199.90
- Gigantic, lightweight aluminum platform with concave foot bed - High load DU bushing and cartridge bearing - Included Flip Pins are blue. Silver, black, red, or gold pins are sold separately - DM-1837 Brendog Brendan Fairclough signature model, murdered - 105x115x17mm
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) - Colors: Black, Gray, Orange, Pink *Titanium spindles have 180lbs weight limit.
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. • Super slick, patent pending, spindle design • Super low-profile design; 10mm thickness at center • Custom undercut pins provide “clip in” style grip and easy removal • Pedal body carriers 4 hidden pins for easy replacement of broken pins • Tapered outside pedal edge for maximum grip and ground clearance • Large foot platform for modern day DH, 110x108mm
Power transfer begins at the pedals, and Shimano's Ultegra Pedals boast Pro Tour-proven tech to make the most of your riding. Composite bodies are light and extra wide, maximizing your efficiency and reducing power-stealing flex. Stainless steel tread plates improve pedal body durability for miles of faithful service. Additionally, adjustable entry and release tension lets you customize pedal performance to suit your riding style.
- Weight: 210g CrMo - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
$148.50 - $165.00
Introducing the new Candy 7: all new body shape with premium stainless steel and aluminum components, and integrated traction pad technology for an even more refined fit, feel, and power transfer. A ribbed body and chamfered edges allow for better traction when unclipped and reduce rock strikes. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver DH-worthy durability that shrug off hard use and big hits. The open design quickly sheds mud for reliability in sloppy conditions and the eight adjustable traction pins per side grip well when you're riding clipped out in corners.
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
• Low-profile, lightweight, wide aluminum body with double-concave platform. • Platform size: 101x114cm • 4 Full sealed cartridge bearings per pedal • Super thin double concave wide platform • Hex-head threaded pin design offers more bite for added security • Fore and aft angled bottom-loading pins • Hidden pin / Grease access port • 20 SHCS hex traction pins per pedal
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
The ultimate weight-saving upgrade. - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
With Shimano's 105 SPD-SL Pedals, you get pro-level features without the price tag. They sport extra-wide platforms with stainless-steel plates for easy and smooth entry and exit, and excellent pedaling efficiency. Inside, there are sealed cartridge bearings for minimal friction and long-term durability. Plus, these fine pedals also feature adjustable entry and release tension so that you can dial them in for the perfect feel.
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
$121.50 - $135.00
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
You can't conquer the trails without power and control. Thankfully, Spank's Oozy Trail pedals give you a rock-solid platform to power all of your off-road exploits. • Cold Forged Alloy Pedal Body • Hollow Taper Scandium Enriched Steel Axle • 12mm Thin - Massive 11x11cm Platform • 360g per pair (with full pin compliment) • 18 Adjustable Pins per Pedal • New CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence • Oversized Sealed Full Compliment Inboard Industrial Bearing • Sealed Outboard IGUS Bushing • Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin • Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces • Chamfered Side Edges for Improved Cornering Clearance
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Crank Brothers steps up to the plate to provide downhillers, freeriders and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050 3s have removable plates so you have full freedom to customize pin location for your preference and the terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 3 pedals are crafted from 6061-aluminum with a chromoly spindle and utilize sealed needle and cartridge bearings for durability and low maintenance.
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution. The Trail III is available in three spindle lengths, standard, +6, and +12mm. Longer spindle models are only available in Intense Black.
Page 1 of 7 Next page