Write a Review
Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$7.50 $10.00 25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
$149.99
The Hurricane features P² Post Production heat-treatment for superior strength. Our one-piece, spiral-fluted (Vortex) steerer reduces weight without decreasing strength. The 31.6/1.4/1.1mm tapered legs are fluted as well, making these the strongest forks we've made to date. Top it off with our new, investment-cast 6mm-thick dropouts and you've got a fork you can trust to hold up to any style of riding. Vortex top cap included. - Height: 314mm - Steerer Tube Length: 172mm - Bearing Race: Machined/Integrated - Offset: 28mm - Compression Bolt: 24 x 1.5mm - Compression Bolt Tool: 6mm allen key - Colors: Matte Black - Weight: 36.2-ounces
$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$968.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions
$1,224.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable low-speed compression spring preload and rebound - Includes removable bolt-on fender - 2.6 max tire width - 223mm max rotor diameter
$1,049.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
$424.99
The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width
$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm
$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter
$1,149.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$896.00
- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps
$169.99
Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork - Color matched for direct compatibility
$89.99
Get back on the road with a genuine replacement fork for Electra Townie Commute bikes. Color matched for direct compatibility.
$139.00
Salsa Firestarter Fork - Mid-blade and dropout rack mounts - Anything Cage mounts on front of fork - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Steel - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 1190 g - Wheel Size: 27.5+ , 29" , 700c - Maximum Tire Clearance (Fork): 3
$209.00
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$473.00 - $483.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
$229.95
The Ritchey Comp Carbon Road Fork was designed for how you love to ride. Built with High Modulus Fiber (HMF), this choice road fork offers superior strength. It's strong without sacrificing a pleasurable road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur, such as side load, torsion, and impact. - Material: carbon blades / alloy steerer, crown, and dropouts - Steerer length: 300mm - Axle-crown: 368mm - Rake/Offset: 43mm - Crown diameter: 34mm (1") - 45mm (1-1/8") - Spacing: 39mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 540g (with uncut steerer) - Color: UD carbon finish (1-1/8") - 3K carbon finish (1")
$1,549.99
Get Inverted. Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,159.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$625.00
A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance
Page 1 of 5 Next page