Brakes/Levers/Pads

High performance brakes for your daily commuter or race machine. R879 brakes are the perfect blend of race day performance and everyday value. Forged then CNC’d 6061-T6 aluminum arms and a familiar cam style quick release make these brakes the perfect match for any modern road levers. SPECIFICATIONS - R879 - Forged / CNC machined 6061-T6 aluminum arms - In-place adjustable CNC road cartridge pad holders - TRP Carbon and Aluminum compound pads included - Stainless Steel hardware - Cam style quick release - Color: Anodized Black - Reach: 39-49mm - Weight: 160g Front 158g Rear including hardware - Maximum Rim Width: 27mm - Sold as Pair (front and rear) - Note: R879 calipers have a forging stamp that says “R870”. This marking is not indicative of model number.

The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy. SPECIFICATIONS - RRL SR - Available with gum or black hoods. - Pull ratio compatible with Spyre and road/cyclocross rim brakes - Sold as a set (left and right)

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

- Exceptional heat management - Rounded edge - UCI approved for road competition

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

- Exceptional heat management - Rounded edge - UCI approved for road competition - Disc Diameter: 220mm - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - Deore BR-M575,BR-M525,BR-M515,BR-T615 - LX BR-T675 - Alivio BR-M4050 - Acera BR-M3050 - Altus BR-M375,BR-M365,BR-M315 - BR-M506 - BR-M505 - BR-MT500 - BR-M495 - BR-M486 - BR-M485 - BR-M475 - BR-M465 - BR-M447 - BR-M446 - BR-M445 - BR-M416 - BR-M415 - BR-MT400 - BR-M395 - BR-M355 TRP - Hylex - HY/RD - Spyre SLC - Spyre - Spyke - Dash Sport Tektro - Orion SL HD-M740 - Orion HD-M730,HD-M725 - Gemini SL HD-M520 / M521 - Gemini HD-M500 / M501,HD-M510 - Draco2 HD-M352 - HDC330 HD-M330 - Auriga HD-M290 / M291,HD-T530,HD-T525,HD-E530,HD-E525,HD-E520,HD-E500 - Aquila MD-M500 - Aries MD-M300 - MD-M280 - Mira MD-C400 - Volans HD-T710 - Vela HD-T290 - Dorado HD-E715 QUAD - Disc Brake

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM - Guide Ultimate,RSC,RS,R,T

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro: - HD-R310 - REVER - MCX1 Flat Mount

The SwissStop E Compound is a long-lasting organic disc brake pad with high temperature stability for consistent brake power. - High endurance pad compound is long lasting - Provides easy modulation of braking force - Organic formula is low noise and rotor-friendly - Compatible with Avid Code (2011-2014), Code R; SRAM Code RSC/R (2017), Guide RE - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Code R (2018+), RSC (2018+), Guide RE; Avid Code (2011-2014), Code R - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

- Aluminum pad holder with R55C4 pads

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - More predictable, linear braking curve - Narrower gap between arms - Compatible with wider 28C tire size - Clear contact feeling with balanced rigidity, weight and stopping power - Sleek design - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - More predictable, linear braking curve - Narrower gap between arms - Compatible with wider 28C tire size - Clear contact feeling with balanced rigidity, weight and stopping power - Sleek design - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - Sleek low-profile caliper design - Wider clearance with larger tire sizes (28c Max) - Smooth and light operation - Integrated braking performance - Comfortable rough road riding with larger tire sizes - Intuitive braking control - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation