Fenders

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible

The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount

•Classic look with full stainless steel Construction •Quick adjust multi-fit stay system •Stainless steel mounting hardware

MTB+ and Fat Bike compatible - Fits up to 4" tires - 100% recyclable Polypropylene construction - Lightweight, durable, and easy to install/remove

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms

Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included

Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany

IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ESC safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ESC safety system - Bottom bracket cutouts - Made in Germany - Wheel size: 20" - Tire width in inches: 1.2"-1.8" - Tire width in mm: 30-54mm - Front mudguard length: 500mm - Rear mudguard length: 800mm

Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

Full coverage fenders Planet Bike’s Full bike fenders are a commuter classic. Their clean lines and rugged construction provide great protection from rain, road grit and other tire spray. Poly Carbonate Construction - Durable polycarbonate blades Hardware - Steel U-stays and hardware are pre-installed Release Tabs - Release Tabs on front fender for added safety Tire Size - Max tire size: 700c x 35mm or 27" x 1.25" - Durable all-weather polycarbonate blades - Steel U-stays and hardware are pre-installed - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 700c - Fender width: 45mm - Max tire size: 700c x 35mm or 27" x 1.25" - Weight: 461 grams

Quick fastening fender sets The Clip Ons do just that. They clip on and off in seconds. They are a great choice if your bike doesn’t have fender eyelets or if you want an easily removable fender. They protect you and your bike from road grit, water and other tire spray. - Durable all-weather polycarbonate blades - Includes hardware to create a secure fit on most bikes - Eyelets Required?: No - Wheel size: 700c - Fender width: 50mm - Max tire size: 700c x 40mm or 27" x 1.5" - Weight: 243 grams

Full coverage fenders tough enough for the Pacific Northwest The Cascadia full fenders will keep you clean whether you’re commuting to work or on an epic cross country tour. These polycarbonate fenders are tough enough for the Pacific Northwest and keep you covered when Mother Nature rains on your ride. Poly Carbonate Construction - Durable polycarbonate blades Stainless Hardware - Stainless steel V-stays and hardware are pre-installed and disc brake compatible Release Tabs - Release Tabs on front fender for added safety Luscious Mudflap - 130mm mudflaps for extended coverage - Durable all-weather polycarbonate blades - 40mm mudflaps for extra coverage - Stainless steel stays and coated steel hardware are pre-installed - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 700c - Fender width: 45mm - Max tire size: 700c x 35mm or 27" x 1.25 - Weight: 507 grams

Rugged full coverage aluminum fenders When the weather turns ugly, Planet Bike's Cascadia ALX fenders have got you covered from the rain, sleet and snow. These aluminum beauties are tough, elegant and simple all at the same time. Whether riding around town or touring cross country, you can rely on these fenders to provide years of full-wrap coverage. We offer them in 9 different sizes so you can find the perfect fit. Aluminum Construction - 6061 aluminum blades Stainless Hardware - Stainless steel V-stays and hardware are pre-installed and disc brake compatible Release Tabs - Release Tabs on front fender for added safety Luscious Mudflap - 100mm mudflaps for extended coverage - 6061 aluminum blades - 100 mm mudflaps for extended coverage - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 700c - Fender width: 43mm - Max tire size: 700c x 35mm or 27" x 1.25: - Weight: 640 grams

The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)

Our classic full coverage fenders with mudflaps The Hardcore full coverage fenders have been keeping rain, mud and snow off the backsides of cyclists for decades. They look great and their rugged all-weather construction lets you comfortably go for a ride even if the weatherman is calling for rain. Poly Carbonate Construction - Durable polycarbonate blades Hardware - Stainless steel stays and coated steel hardware are pre-installed Release Tabs - Release Tabs on front fender for added safety Luscious Mudflap - 50mm mudflaps for extended coverage - Durable all-weather polycarbonate blades - 50mm mudflaps for extra coverage - Stainless steel stays and coated steel hardware are pre-installed - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 26" - Fender width: 35mm - Max tire size: 26" x 1.9" - Weight: 509 grams

Full coverage fenders tough enough for the Pacific Northwest The Cascadia full fenders will keep you clean whether you’re commuting to work or on an epic cross country tour. These polycarbonate fenders are tough enough for the Pacific Northwest and keep you covered when Mother Nature rains on your ride. Poly Carbonate Construction - Durable polycarbonate blades Stainless Hardware - Stainless steel V-stays and hardware are pre-installed and disc brake compatible Release Tabs - Release Tabs on front fender for added safety Luscious Mudflap - 130mm mudflaps for extended coverage - Durable all-weather polycarbonate blades - 130mm mudflaps for extra coverage - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 26" - Fender width: 60mm - Max tire size: 26" x 1.9" - Weight: 588 grams

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

Full coverage aluminum recumbent fender If you ride bent, our recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-traditional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

- Unique softer PP material helps prevent cracks in extreme temperatures - UV resistance for increased durability. - Proprietary bracket design helps keep fender stable on the bike - Front model fits most down-tubes - Rear model offers adjustable angle

X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm