Write a Review

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Need more carrying capacity for running errands? Then check out Topeak's Front Basket. It easily attaches to you bike's handlebars and holds all your groceries or whatever else you pick up. And, the handle makes this basket extremely portable.

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

Specialized's Turbo Pro tire is a competitive clincher that utilizes many of the same features found in their S-Works version. After all, competitive riders need a fast, light, and tough tire, and the Turbo Pro is all three. With its flawless tread, supple casing, and unrivaled GRIPTON compound, it features an extremely low rolling resistance and superior cornering traction. Put it all together, and you'll be climbing and descending with confidence and speed. - Casing: 60 TPI - Bead: Foldable - Compound: GRIPTON - Flat Protection: BlackBelt - 700 x 24mm, PSI 100-125, approximate weight 240g - 700 x 26mm, PSI 100-125, approximate weight 250g - 700 x 28mm, PSI 85-95, approximate weight 280g

The Italian Army Knife VENTI builds on the flat design, forged mid-length tools, and Stainless Steel hardware of our award-winning line of Italian Army Knives. Adding new tools including the most ergonomic and functional chain breaker ever featured in a portable multi-tool, the VENTI has everything you need. The unique magnetic slide-lock design of the VENTI chain-tool allows it to be more than twice as long as other designs for exceptional ergonomics in use, while also allowing it to be removed completely from the tool for improved functionality. The forged mid-length tools are long enough to reach all common cycling fasteners, but not so long that they twist or deform under load. The ergonomic side plates also hold a discreet magnetic storage feature for a spare master link and all tools are coated with SILCA's unique high-grip chrome plating which provides better torque transfer at the bolt interface. - Metal injection sidebars with knurled grip surface and stainless steel hardware - Forged chain breaker for 10-12 speed chain - Magnetic storage for 10-12 speed compatible chain connectors - Forged and plated tools: - Hex 2/2.5/3/4/5/6/8 - Torx 8/10/20/25 - PH2/SL4 - 7mm box wrench - 8mm flare nut wrench - 10mm open-end wrench - Disc pad spreader - Valve core remover - Spoke wrenches—13G / 15G - 172 grams

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures.  The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

Shimano's Deore Front Derailleur features wide pivots and a rigid cage for awesome shifting and top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. It's a dual-pull, so it'll work with any cable routing, and its design gives you better rear tire clearance.

Shimano Tourney SL-RS45 shift lever delivers easy and reliable shifting for all riders. The Revoshift shifter allows riders to maintain a secure and stable grip on the handlebar by requiring just a twist of the thumb and index finger for shifting. - Twist shifter - Optical gear display - Includes SIS40 shift cable set - Stationary grips not included

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Planet Bike's Comfort Tractor Saddle is an ultra-wide seat featuring Planet Bike's SuperSoft padding and a durable and weatherproof top. It's the perfect upgrade for your cruiser, city bike or even your exercise bicycle.

OnGuard's Bulldog LS (Long Shackle) offers a large locking zone, plus OnGuard's high-security 13mm-thick hardened-steel construction and stout X2 double-bolt lock, which resists cutting, picking, bumping, and drilling. And with the included mounting bracket, your Bulldog can come along for every ride. This great U-lock also comes with five keys, including OnGuard's Microlight key which has a built-in light.

The Kenda Komfort is a strong, durable, lightweight hybrid tire that is designed for smooth trails, bike paths, and street use.

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate improves internal visibility MOUNTING SYSTEM - Velcro platform mounting straps and bungee hook mount ADDED BENEFIT - Zippered main compartments - Zippered side pockets - 3M triangle rear logos - Ultra-stiff polyurethane backing plate - Incorporated carry-handle - LED light clip - Volume 25 L / 1516 cu in (set) - Weight 830g / 1.83 lbs (set)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)