Replacement or extra magnet for Thule Pack ’n Pedal panniers. • Rare earth magnet that secures lower part of Thule Pack ’n Pedal panniers. • Part of patent pending “vanishing hardware” attachment solution for Thule Pack ’n Pedal Panniers. • Works with all Thule Pack ’n Pedal Panniers.
Dimension Bicycle Mounted Rack Parts - Sold as a pair - For 14mm-16mm seat stays - Nuts and bolts included - Plastic coated for secure attachment to frames without braze-ons
Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
Topeak handlebar bag fixer for eBikes with display units.
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Optimize your handlebar space with Thule's unique Pack n' Pedal Handlebar Mount. This multi-position mount lets you attach two Thule accessories (sold separately) to your handlebars, one in a forward-facing position and one on top, facing the rider. The Handlebar Mount uses easy snap-in mounts so installing and removing your accessories is fast and easy.
Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.
Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).
Accessory to attach Thule Pack ’n Pedal pannier magnet onto virtually any other bike rack. • Attach the Thule magnet to the adapter bracket (sold separately) for attachment to virtually any type of bike rack. • Versatile design allows for a variety of attachment options.
Dual clamps provide a secure fit to most bicycle handlebars (31.8mm, 26.0mm and 25.4mm) - Accessories snap in and out in seconds - Quick and easy installation - Compatible with all Thule handlebar bags and accessories - Mounts facing the rider or facing forward
When adding more portage capacity to your frame or fork is the name of the game, the winning solution is Specialized's Burra Burra Stuffcage. It's an ideal way to carry the Stuffpack canister, water bottles, or a decent sized fuel canister. So think of it this way: When there's no more room, there's always the Stuffcage. - Oversized tubular aluminum increases overall strength and durability for a long lifespan and ample load capability. - Two coated webbing straps and camlocks are included to provide secure, reliable attachment. - Compatible with standard water bottle mounts or a fork designed to accept 63mm bottle mounts. - Matte black anodized finish is sleek and works well with any other color. - Compatible with Stuffpack.
The KEG Storage Vessels allows you to store all key emergency gear, like patches, an extra tube, a micro tool, and CO2 cartridge, all in one rigid, durable 16oz container that easily fits into any Specialized bottle cage. - 16oz container made from durable, BPA-Free PETE Material - Wide 63mm opening makes it easy to place and retrieve items from inside KEG - Featuring a "stash cap" on the underside of KEG lid, providing an ideal place to store patch kits. - Printed with non-solvent based inks (UV Cured), CPSC-approved ink
Specialized's MTB XC Box integrates with any SWAT compatible Specialized water bottle cage and SWAT-prepped mountain bike to hold all of the gear need to make fast trailside flat repairs. - Fits one Turbo 29er innertube, SWAT tire lever, CO2 twist head, and 25g CO2 cartridge (not included).
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
Salsa's Anything Cage Straps secure your extra gear to the Anything Cage. These nylon straps feature a ladder buckle, are 20mm wide, and can come in handy off the bike as well.
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
Salsa's EXP Series Anything Cradle system is designed to create carrying capacity in front of your handlebars, while providing ample room for cables without fear of kinking them. This system is available as a complete "kit", or sold individually for custom set-ups. - Anything Cradle Straps are the perfect width for the Anything Cradle - Can also be used to strap stuff down on racks or wherever else is needed - They cinch tight but easily release tension with a push of the buckle - Extremely versatile - 25mm nylon webbing, Duraflex hardware
- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm
Lower mount kit for all Salsa's Alternator Racks (sold separately)
Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Note: Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
The Trizone 30's multiple inner and outer pockets and compartments allow you to stay organized and keep your focus on your performance. DETAILS: -1680D fabric -Flat bottom panel and robust construction: Allow pack to sit flat and keep its shape -2 inner compartments: Protect sunglasses and gels -Neoprene bottle sleeves: Provides safe storage for up to 3 bottles -Padded and ventilated handle -Ergonomic back with ventilated zone and padding: Excellent comfort and enhanced ventilation -Adjustable ventilated shoulder straps -Adjustable sternum belt: Maintains straps in place -Velcro fastener on one side: Mini pump storage -Back pocket with zip: Ideal for travel documents, passport and ID -Reversed zip: Easy to open and more water resistant -Two-way zip -Reflective piping and logos: Increased safety
This transition bag holds all your race-day essentials thanks to a multitude of compartments and a flat bottom panel to keep its shape. DETAILS: -1680D fabric -Flat bottom panel and robust construction: Allow pack to sit flat and keep its shape -4 inner compartments: Protect sunglasses and gels and store bike tools and other essentials -Neoprene bottle sleeves: Provides safe storage for up to 3 bottles -Waterproof zippered compartment: For shoes or dirty/wet clothing -Padded and ventilated handle -Ergonomic back with ventilated zone and padding: Excellent comfort and enhanced ventilation -Adjustable ventilated shoulder straps -Adjustable sternum belt: Maintains straps in place -Velcro fastener on one side: Mini pump storage -Back pocket with zip: Ideal for travel documents, passport and ID -Reversed zip: Easy to open and more water resistant -Two-way zip -Reflective piping and logos: Increased safety
Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
$12.95 - $14.95
Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
Page 1 of 2 Next page